Roller Blind Motors

All heicko roller blind motors come with clipping head, which makes the installation of your motorized shades very fast and easy. Clipping head mounting does provide a very strong connection between the motor and the wall mounting bracket (Item No. BLBRM75-106) which reduces the vibration significantly compared to a traditional square pin mounting. In addition, the clipping head mounting gives your blinds more pleasing look as there is no visible gap between the motor and the mounting bracket.

Contact Sales Representative

Line ID: @fortuneshading

HREFL1040-28 (5 Nm)

Noiseless and fast tubular motor with built-in receiver for roller blinds.

Extremely low noise, high speed and compact size makes this high-end motor ideal for roller blinds. Up to 3 normal size blinds can be coupled together with joint brackets (Item No. BLBRJ-180-63) and operated simultaneously with only one motor.

Built-in receiver gives you the convenience to operate your shades via heicko smart home app or a hand-held emitter. If only top and bottom limit positions are not enough you can set up to 8 intermediate limit positions for for your blinds with our 16-channel design emitter (Item No. HR120029A).

HRF1040-06 (6 Nm)

Fast tubular motor with built-in receiver for roller blinds.

High speed and compact size makes this motor ideal for roller blinds. Up to 3 normal size blinds can be coupled together with joint brackets (Item No. BLBRJ-180-63) and operated simultaneoulsy with only one motor.

Built-in receiver gives you the convenience to operate your shades via heicko smart home app or a hand-held emitter.

HREF6020-28 (20 Nm)

Strong and fast tubular motor with built-in receiver for heavy blinds.

High torque and compact size makes this motor suitable for your larger roller blinds. Due to its high torque several large blinds can be coupled together with joint brackets (Item No. BLBRJ-180-63) and operated with only one motor. Built-in receiver gives you the convenience to operate your shades via heicko smart home app or a hand-held emitter.

HRSDC4010-14-40 (10 Nm)

Strong wireless tubular motor with built-in battery and receiver.

The noiseless rechargeable DC motors fit particularly well in places where the connection to the power grid (220 V) is not available.

Thanks to the low energy consumption, the battery can last between 3 and 6 months on a single charge. The battery life depends on the number of cycles of the tubular motor and the weight of the hangings. Recharging the battery will only take a few hours and the removal of the battery is not necessary as the tubular motor is being recharged on the built-in socket.

Use the power of the sun to install a completely self-suffcient system by combining your heicko DC motor with a solar panel (Item No. HR1200-LA-SOLAR).

ERSDC3808-35

Fast wireless tubular motor with built-in battery and receiver.

This noiseless rechargeable DC motor fit particularly well in places where the connection to the power grid (220 V) is not available. Due to its compact size it will fit in a 38 mm round tube. This motor is recommended for smaller blinds with width less than 2 meters.

Thanks to the low energy consumption, the battery can last between 3 and 6 months on a single charge. The battery life depends on the number of cycles of the tubular motor and the weight of the hangings. Recharging the battery will only take a few hours and the removal of the battery is not necessary as the tubular motor is being recharged on the built-in socket via USB.

HRSDC1040-05 (5 Nm)

Fast wireless tubular motor with built-in battery and receiver.

The noiseless rechargeable DC motors fit particularly well in places where the connection to the power grid (220 V) is not available. 

Thanks to the low energy consumption, the battery can last between 3 and 6 months on a single charge. The battery life depends on the number of cycles of the tubular motor and the weight of the hangings. Recharging the battery will only take a few hours and the removal of the battery is not necessary as the tubular motor is being recharged on the built-in socket.

Use the power of the sun to install a completely self-sufficient system by combining your heicko DC motor with a solar panel (Item No. HR1200-LA-SOLAR).

Contact Sales Representative: 086-1028546

Type HREFL1040-05 HRF1040-06-38 HREF6020-28
Length without bracket 590 mm 600 mm 575 mm
Motor diameter 35 mm 35 mm 45 mm
Input voltage 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz
Power 126 W 155 W 203 W
Rated torque 5 Nm 6 Nm 20 Nm
Maximum load 11 kg 14 kg 45 kg
Rated RPM 28 rpm 28 rpm 28 rpm
Current consumption 0.55 A 0.68 A 0.84 A
Power on duration 4 min 4 min 4 min
Number of wires 3 3 3
Motor protection, ISO-class H H H
Protection type, VDE 700 IP44 IP44 IP44
Cable length 2.0 m 2.0 m 2.0 m
Max. turns / circles No limit 38 U No limit
For shaft diameter 63 mm round tube 63 mm round tube 63 mm round tube
Radio frequency 433.92 MHz 433.92 MHz 433.92 MHz
Sound pressure level < 34 dB(A) - -
Compatible with e-smart home YES YES YES
Type ERSDC3808-35 HRSDC1040-05 HRSDC4010-14-40
Length without bearing 425 mm 655 mm 655 mm
Motor diameter 25 mm 35 mm 35 mm
Input voltage 7.4 V 12 V 12 V
Power 14.8 W 42 W 36 W
Rated torque 0.8 Nm 5 Nm 10 Nm
Maximum load 3.1 kg 11 kg 20 kg
Rated RPM 35 rpm 28 rpm 14 rpm
Current consumption 2.0 A 3.5 A 3.00 A
Power on duration 4 min 4 min 4 min
Number of wires 2 2 2
Motor protection, Iso-class H H H
Protection type, VDE 700 IP20 IP20 IP44
Capacity of the battery built-in battery2200 mAh built-in battery2200 mAh built-in battery2200 mAh
Max. turns / circles ∞ no limitation no limitation
For shaft diameter 38 mm round tube 63 mm round tube 63 mm round tube
Radio frequency 433.92 MHz 433.92 MHz 433.92 MHz
Compatible hand-held emitter Series HR12003* Series HR12002* Series HR12003* Series HR12002* Series HR12003* Series HR12002*