ER - THE RELIABLE

The motors in this series are suitable for 40's or 50's as well as 60's or 70's 8-square shafts. This is possible due to the motors being available with a diameter of 35 mm and 45 mm. The tubular motor is maintenance-free with a high life span and is equipped with a thermal overload protection system. The ease of mechanically setting up the endpoints combined with
the silent running of the motor makes this model universally applicable. 

TECHNICAL INFORMATION

ER1040-13 ER1060-10 ER1060-20 ER1060-30 ER1060-40 ER1060-50
Length without bracket 465 mm 469 mm 469 mm 539 mm 539 mm 539 mm
Motor diameter 35 mm 45 mm 45 mm 45 mm 45 mm 45 mm
Input voltage 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz
Power 121 W 112 W 145 W 191 W 198 W 205 W
Rated torque 13 Nm 10 Nm 20 Nm 30 Nm 40 Nm 50 Nm
Maximum load 29 kg 23 kg 45 kg 68 kg 90 kg 113 kg
Idle speed 14 min-1 15 min-1 15 min-1 15 min-1 15 min-1 12 min-1
Current consumption 0,53 A 0,49 A 0,64 A 0,83 A 0,86 A 0,89 A
Power on duration 4 min 4 min 4 min 4 min 4 min 4 min
No. of cores 4 4 4 4 4 4
Motor protection, ISO-class H H H H H H
Protection type, VDE 700 IP44 IP44 IP44 IP44 IP44 IP44
Cable length 2,0 m 2,0 m 2,0 m 2,0 m 2,0 m 2,0 m
For shaft diameter 40mm, octagonal shaft 60mm, octagonal shaft 60mm, octagonal shaft 60mm, octagonal shaft 60mm, octagonal shaft 60mm, octagonal shaft